Velleman-Kit K6713 Mode D'emploi page 18

1 CHANNEL INFRARED RECEIVER
This 1 channel receiver can be used together with our 15 channel
infrared transmitter (K6710) to remotely control a single device.
The receiver can be tuned to one of the 15 channels and you can
further choose from four different remote controls (by means of
identification codes) the receiver must react to.
In case you use two 1 channel receivers within the same room,
you can set the two memories so as to make one receiver react to
memory 1 only and the other one to memory 2 only, for example.
The output is in the form of a relay, whose state is also reflected
by a LED. In order to increase its ease of use, the receiver has
been equipped with a push button for local control.
Thanks to its compact construction, the whole fits in a standard
adapter housing. Its feeding voltage is taken directly from the
means.
TECHNICAL DATA
Relay output: 5A/220V
LED indication of the output state
Pulse or changeover output
Four identification codes
Fifteen channel codes
Two memories
Push button for local control
Power supply 220 or 110VAC(*)
Fits in a standard adapter housing
* If the supply voltage is 110VAC you must fit a 1uF (min. 200V)
capacitor for C13.
Modifications reserved
H6713-ED1-18