How To Power Ac Appliances - Westinghouse iGen200s Mode D'emploi

HOW TO POWER AC APPLIANCES WITH THIS PRODUCT
1. Make sure the appliance you are plugging in is turned off.
2. Connect the power cable plug of the electrical appliance to the AC
outlet of the product.
3. Press the "AC Power ON/OFF" button to turn on. The button will
illuminate when it is on.
4. Turn AC appliance on.
5. The LED Display will display real-time wattage of the appliance.
6. When finished, turn off device, remove power cable and press "AC
Power ON/OFF" to turn outlets off. (If you leave the AC Power button
on it will drain the battery.)
NOTICE: If the total output exceeds 150W, the power station will
automatically shut off. Please ensure the power consumption is less than
150W, then press the AC Power button.
WARNING: The AC outlets, AC voltage, and frequency are different
according to different countries; please carefully check whether the
product specifications are consistent with the appliance specifications
before use, otherwise, it can lead to dangerous situations.
NOTE: When the AC port is not in use, turn "AC Power ON/OFF" button off
to conserve power.
CAN'T SUPPORT DEVICES MORE THAN 150W
Hair Dryer
Rice Cooker
Microwave Oven
Induction Cooker
Westinghouse Outdoor Power Equipment - 9
Electric Drill
Toaster
Heater
Electric Kettle
Blender