Futurelight PCS-1200 MK-2 Mode D'emploi page 47

- Main menu 4
♦ Press [ENTER] for 3 seconds to enter the main menu (display flashing).
♦ Press [UP] to select "TIME".
- Fixture running time
With this function you can display the running time of the device.
♦ Select "MATI" by pressing [UP] button.
♦ Press [ENTER], the display shows"XXXX", "X" stands for the number of hours.
♦ Press [ENTER] or [EXIT/DN] to exit.
- Lamp running time
With this function you can display the running time of the lamp.
♦ Select "LATI" by pressing [UP] button.
♦ Press [ENTER], the display shows"XXXX", "X" stands for the number of hours.
♦ Press [ENTER] or [EXIT/DN] to exit.
- Clear lamp time
♦ With this function you can clear the running time of the lamp. Please clear the lamp time every time you
replace the lamp.
♦ Select "CLLT" by pressing [UP] button.
♦ Press [ENTER], the display shows"ON" or "OFF".
♦ Press [UP] to select "ON" if you wish to enable this function or "OFF" if you don't.
♦ Press [ENTER] to confirm.
♦ Press [EXIT/DN] in order to return to the main menu.
- Main menu 5
♦ Press [ENTER] for 3 seconds to enter the main menu (display flashing).
♦ Press [UP] to select "EDIT".
47/99 51840006_V_1_2.DOC