Publicité
Les langues disponibles
Les langues disponibles
Selecting Your Model Profile
The TQi radio system has been programmed with servo reversing profiles for use with current Traxxas models. Find your model on this chart and follow the steps
to set the default transmitter settings for your model. The settings for servo direction will be set, but you may need to adjust the trim and endpoint settings for the
steering and throttle channels. Should you ever need restore your transmitter to the default settings for your model, use the steps described in this chart.
Models: All 1/16th Scale Models; E-Revo BE; E-Revo; Revo;
Revo 3.3; Raptor; Slash 4X4 Series; Slash Series; Telluride 4X4;
Slayer; Stampede 4x4 Series; Summit; T-Maxx 3.3, Traxxas Rally
Models: Bandit; Bandit VXL; Blast; E-Maxx BE; E-Maxx;
Rustler; Rustler VXL; Spartan; Stampede; Stampede VXL;
Nitro Stampede; Nitro Sport; Villain EX; XO-1
Models: Jato; Jato 3.3
Models: Nitro 4-Tec 3.3; Nitro Rustler; Blast
Models: T-Maxx 3.3; T-Maxx Classic; S-Maxx
Model: Traxxas Funny Car
Using the Traxxas TQi Radio System
with non-Traxxas Models
The TQi radio system can be used with all popular servos in any hobby-
grade R/C vehicle. From the factory, the transmitter is set for Profile 1,
with each channel set as "reversed." The chart to the right indicates the
direction the servos will operate. Follow the instructions on page 14 if
you need to change these setting(s) to suit your model.
(Resetting to Defaults)
Turn the
Transmitter
Hold both MENU
OFF
Turn the
Transmitter
Hold both MENU
OFF
Turn the
Transmitter
Hold both MENU
OFF
Turn the
Transmitter
Hold both MENU
OFF
Turn the
Transmitter
Hold both MENU
OFF
Turn the
Transmitter
Hold both MENU
OFF
Turn the
Transmitter
Release MENU and
ON
SET; red LED blinks
and SET
Turn the
Transmitter
Release MENU and
ON
SET; red LED blinks
and SET
Turn the
Transmitter
Release MENU and
ON
SET; red LED blinks
and SET
Turn the
Transmitter
Release MENU and
ON
SET; red LED blinks
and SET
Turn the
Transmitter
Release MENU and
ON
SET; red LED blinks
and SET
Turn the
Transmitter
Release MENU and
ON
SET; red LED blinks
and SET
Channel 1
Steering
Channel 2
Throttle/Brake
GETTING STARTED
Press SET to clear settings. LED
will turn solid green. Transmitter
is restored to the default
settings for the listed models.
1
x
Press SET to clear settings. LED
2
x
will turn solid green. Transmitter
is restored to the default
Press MENU;
settings for the listed models.
red LED blinks (x2)
2
x
Press SET to clear settings. LED
x
3
will turn solid green. Transmitter
is restored to the default
Press MENU twice;
settings for the listed models.
red LED blinks (x3)
3
x
Press SET to clear settings. LED
x
4
will turn solid green. Transmitter
is restored to the default
Press MENU three times;
settings for the listed models.
red LED blinks (x4)
4
x
Press SET to clear settings. LED
5
x
will turn solid green. Transmitter
is restored to the default
Press MENU four times;
settings for the listed models.
red LED blinks (x5)
5
x
Press SET to clear settings. LED
6
x
will turn solid green. Transmitter
is restored to the default
Press MENU five times;
settings for the listed models.
red LED blinks (x6)
Channel 3*
Rocker Switch
Channel 4/5*
3-Position Switch
Ch. 4
TQ
RADIO SYSTEM • 5
i
Ch. 5
Publicité
