Publicité
Les langues disponibles
Les langues disponibles
CHARGE AND OPERATION INSTRUCTIONS
Charge
1- Remove the rubber waterproof cover
2- Connect the DC plug of the charger, then connect charger to mains.
3- When the charger led light becomes green, it means that battery is full charged.
4- Disconnect the charger after charging.
Operation instructions
1- To turn ON, Press RED button on remote controller or press ON/OFF button under the fixture.
2 - Remote control operation:
Brightness control for static color mode
and program speed control in FLASH,
STROBE, FADE and SMOOTH modes.
Direct selection of static colors
Storage
For long time disuse, please recharge it first, and then press 8 seconds on Green (G) button
from remote controller. The device will reset and will turn OFF. To turn ON again, use
ON/OFF button under the device.
Power ON/OFF
Auto color change
White strobe
Auto color change with flash effect
Auto smooth color change
Publicité
