Télécharger Imprimer la page

Publicité

Liens rapides

THIS OPERATING MANUAL CONTAINS
IMPORTANT SAFETY INFORMATION.
READ CAREFULLY AND UNDERSTAND ALL
INFORMATION BEFORE OPERATING TOOL.
SAVE THIS MANUAL FOR FUTURE USE.
OWNER/USER RESPONSIBILITY
The owner and/or user must have an understanding of the
manufacturer's operating instructions and warnings before using
this service jack. Personnel involved in the use and operation of
equipment shall be careful, competent, trained, and qualified in
the safe operation of the equipment and its proper use when
servicing motor vehicles and their components. Warning
information should be emphasized and understood.
If the operator is not fluent in English, the manufacturer's
instructions and warnings shall be read to and discussed with
the operator in the operator's native language by the
purchaser/owner, making sure that the operator comprehends
its contents.
Owner and/or user must study and maintain for future reference
the manufacturer's instructions. Owner and/or user is
responsible for keeping all warning labels and instruction
manuals legible and intact. Replacement labels and literature
are available from the manufacturer.
FOR YOUR SAFETY AND TO PREVENT INJURY:
Always support
vehicle with
jack stands.
7917160
TRANSMISSION JACK
THE USE OF THIS JACK IS LIMITED TO THE REMOVAL, INSTALLATION, AND
TRANSPORTATION IN THE LOWERED POSITION, OF TRANSMISSIONS
AND DIFFERENTIALS. IT MAY BE USED WITH APPROPRIATE ADAPTERS
MANUFACTURED SPECIFICALLY FOR THE JACK TO HANDLE OTHER
COMPONENTS, SUCH AS REAR AXLE UNITS AND TRANSFER CASES,
WITHIN THE WEIGHT LIMITATIONS SPECIFIED.
NO ALTERATION TO THE JACK OR ADAPTERS SHALL BE MADE.
BE SURE THE VEHICLE IS APPROPRIATELY SUPPORTED BEFORE STARTING
REPAIRS.
DO NOT OVERLOAD. OVERLOADING CAN CAUSE DAMAGE TO OR
FAILURE OF THE JACK.
THIS JACK IS DESIGNED FOR USE ONLY ON HARD LEVEL SURFACES
CAPABLE OF SUSTAINING THE LOAD. USE ON OTHER THAN HARD LEVEL
SURFACES CAN RESULT IN JACK INSTABILITY AND POSSIBLE LOSS OF
LOAD.
ONLY ATTACHMENTS AND/OR ADAPTERS SUPPLIED BY THE
MANUFACTURER SHALL BE USED.
READ, STUDY AND UNDERSTAND THE OPERATING MANUAL PACKED
WITH THIS JACK BEFORE OPERATING. FAILURE TO HEED THESE
WARNINGS MAY RESULT IN LOSS OF LOAD, DAMAGE TO JACK, AND/OR
FAILURE RESULTING IN PROPERTY DAMAGE, PERSONAL OR FATAL
INJURY.
1
MODEL # 791-7160
1200 LB.
LOW PROFILE
06/05/01

Publicité

loading

Sommaire des Matières pour Napa 791-7160

  • Page 1 MODEL # 791-7160 1200 LB. LOW PROFILE TRANSMISSION JACK THIS OPERATING MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. READ CAREFULLY AND UNDERSTAND ALL INFORMATION BEFORE OPERATING TOOL. SAVE THIS MANUAL FOR FUTURE USE. OWNER/USER RESPONSIBILITY The owner and/or user must have an understanding of the manufacturer’s operating instructions and warnings before using...
  • Page 2 OPERATING MANUAL & PARTS LIST FOR 791-7160 BEFORE USE OPERATING INSTRUCTIONS IMPORTANT: Before attempting to raise a vehicle, check Air may become trapped in the hydraulic system during transit. vehicle service manual for recommended lifting surfaces. To purge air: 1. Open release valve by turning knob counterclockwise.
  • Page 3 OPERATING MANUAL & PARTS LIST FOR 791-7160 Ref. Part Ref. Part Description Qty. Description Qty. Base Connecting Block 7750-03BL Hyd. Unit Washer Return Spring Bolt Handle Assy. Handle Grip SC301 3" Caster Clip 7750-02BL Lifting Arm Assy. Snap Ring Lifting Straps...
  • Page 4 OPERATING MANUAL & PARTS LIST FOR 791-7160 24 30 ef. # Part # Description Qty. 664606Y Finger 664811Y Pivot 664814Y Pivot 664815Y Pivot 664816Y Pivot 664819Y Handle 664820Y Long Handle with Knob Only items listed with part numbers are available individually.
  • Page 5 OPERATING MANUAL & PARTS LIST FOR 791-7160 Hydraulic Power Unit Ref. Part Description 6649CW Copper Washer 6649HC Hydraulic Cartridge 6649A15 Handle Sleeve Seat 6649A20 Retaining Ring 6649A21BL Handle Assembly 6649A22 Pin (including #24 retaining ring) 6649A23 Pin (including #24 retaining ring)
  • Page 6 This warranty does not cover repairs made by anyone who is not a BALKAMP/NAPA Professional Lifting Equipment Authorized Repair Center.
  • Page 7 MODEL # 791-7160 544 KG GATO CON PERFIL BAJO PARA TRANSMISIÓN ESTE MANUAL PARA EL FUNCIONAMIENTO CONTIENE INFORMACIONES IMPORTANTES, PARA LA SEGURIDAD. LEA CUIDADOSAMENTE Y ASEGÚRESE DE COMPRENDER TODAS ESTAS INFORMACIONES, ANTES DE PROCEDER EL FUNCIONAMIENTO ESTE APARATO. CONSERVE ESTE...
  • Page 8 MANUAL DEL FUNCIONAMIENTO Y LISTA DE PIEZAS PARA 791- 7160 ANTES DE UTILIZARLO INSTRUCCIONES PARA EL FUNCIONAMIENTO Es posible que durante el transporte, una cantidad de aire se introduzca dentro del sistema hidráulico. IMPORTANTE: Antes de intentar cualquier levantamiento de vehículos, verifique el manual de servicio del vehículo al Para limpiarlo: levantar, para conocer las superficies de levantamiento...
  • Page 9 Durante el periodo de garantía de 2 años, cualquier producto y / o pieza presumiblemente defectuoso debe devolverse, libre de porte, provisto con una prueba de la fecha de compra, al centro autorizado más cercano, para la garantía Balkamp - NAPA, por el equipo profesional de levantamiento.
  • Page 10 MODEL # 791-7160 544 KG CRIC À BAS PROFIL POUR TRANSMISSION CE MANUEL DE FONCTIONNEMENT RENFERME DES RENSEIGNEMENTS IMPORTANTS, RELATIFS À LA SÉCURITÉ. LISEZ ATTENTIVEMENT ET ASSUREZ-VOUS DE COMPRENDRE TOUS CES RENSEIGNEMENTS, AVANT DE PROCÉDER AU FONCTIONNEMENT DE CET OUTIL. CONSERVEZ CE MANUEL POUR RÉFÉRENCE ÉVENTUELLE.
  • Page 11 MANUEL DE FONCTIONNEMENT ET LISTE DE PIÈCES POUR 791- 7160 AVANT L’UTILISATION Levage: Pompez la pédale pour élever la selle et entrer en contact avec la charge. Placez le cric de façon à ce que le poids Il est possible que durant le transport, une quantité d’air se soit de la charge soit distribué...
  • Page 12 Durant la période de garantie de 2 ans, tout produit et / ou pièce présumé défectueux doit être retourné, franc de port, muni d’une preuve de la date d’achat, au centre autorisé le plus proche pour la garantie Balkamp - NAPA, pour équipement professionnel de levage.