Sunex Tools 7700C Manuel Du Propriétaire page 4

OWNER'S MANUAL
TROUBLESHOOTING
Important: Service jacks are self-contained devices used for lifting, but not sustaining, a partial vehicular load. In accordance with ASME
PASE-2019 Load Sustaining Test: "A load not less than the rated capacity...shall not lower more than 1/8" (3.18mm) in the first minute, nor a
total of .1875" (4.76mm) in 10 minutes." Lowering within this range is considered normal operation and is NOT a warrantable defect.
PROBLEM
1. Unit will not lift rated load.
2. Unit will not sustain rated load or feels "spongy" under rated load.
3. Unit will not lift to full height.
4. Unit still does not operate.
INSPECTION
Visual inspection should be made before each use of the trans mis sion jack, checking for leaking hydraulic fluid and dam aged, loose or
missing parts. Each jack must be in spect ed by a man u fac tur er's repair facility im me di ate ly if ac ci den tal ly sub ject ed to an ab nor mal load
or shock. Any jack which appears to be damaged in any way, found to be badly worn, or operates abnormally MUST BE RE MOVED FROM
SER VICE until nec es sary repairs are made by a man u fac tur er's au tho rized repair facility. It is rec om mend ed that an annual in spec tion of
the jack be made by a man u fac tur er's au tho rized repair facility and that any de fec tive parts, decals or warning labels be replaced with
man u fac tur er's specified parts. A list of authorized repair facilities is available from the manufacturer.
PROPER STORAGE
It is recommended that the jack be stored in a dry location with all wheels touching the ground on a relatively level surface.
OWNER/USER RESPONSIBILITY
The owner and/or user must have an understanding of the manufacturer's operating instructions and warnings before using the transmission
jack. Personnel involved in the use and operation of equipment shall be careful, competent, trained, and qualified in the safe operation of the
equipment and its proper use when servicing motor vehicles and their components. Warning information should be emphasized and understood.
If the operator is not fluent in English, the manufacturer's instructions and warnings shall be read to and discussed with the operator in the
operator's native language by the purchaser/owner, making sure that the operator comprehends its contents. Owner and/or user must study
and maintain for future reference the manufacturer's instructions and pertinent warning information. Owner and/or user is responsible for
keeping all warning labels and instruction manuals legible and intact. Replacement labels and literature are available from the manufacturer.
LIMITED WARRANTY
SUNEX INTERNATIONAL, INC. WARRANTS TO ITS CUSTOMERS THAT THE COMPANY'S SUNEX TOOLS ® BRANDED PRODUCTS
ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS.
Sunex International, Inc. will repair or replace its Sunex Tools ® branded products which fail to give satisfactory service due to defective
workmanship or materials, based upon the terms and conditions of the following described warranty plans attributed to that specific
product. This product carries a ONE-YEAR warranty. During this warranty period, Sunex Tools will repair or replace at our option any part
or unit which proves to be defective in material or workmanship.
Other important warranty information
This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does not cover any repairs
or replacement made by anyone other than Sunex Tools ® or its authorized warranty service centers. The foregoing obligation is Sunex Tools'
sole liability under this or any implied warranty and under no circumstances shall we be liable for any incidental or consequential damages.
NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you. Return equipment or parts to an authorized service center, transportation prepaid. Be certain to include your name and
address, evidence of the purchase date, and description of the suspected defect. If you have any questions about warranty service, please
write to Sunex Tools ® . This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Repair kits and replacement parts are available for many of Sunex Tools products regardless of whether or not the product is still covered by
a warranty plan.
SHIPPING ADDRESS: Sunex Tools • 315 Hawkins Rd. • Travelers Rest, SC 29690
MAILING ADDRESS: Sunex Tools • P.O. Box 1233 • Travelers Rest, SC 29690
7700C
TELESCOPIC TRANSMISSION JACK
ACTION
Purge air from hydraulic system by following procedure under
SETUP.
Purge air from hydraulic system as above.
Purge air from hydraulic system as above.
Contact Sunex authorized hydraulic service center.
4
MODEL 7700C
CAPACITY: 700 LBS.
Rev. 1/22/20