myGEKOgear Aegis 200 Manuel De L'utilisateur page 19

deleted on your PC/laptop.
After being connected to PC, password interface shows up,
please enter the password (default password is 000000)
Press the (ok) button 6 times, the camera will be
recognized by the computer as an extra drive. Then go to
the camera folder and delete the files not needed.
5.15 Charging
When camera battery is low, the battery icon will flash in
the display, and you will hear an alert tone. When this
happens, charge the camera.
While the camera is charging, the indicator will light blue
and will turn white after camera is fully charged. It will
take approximately 4 hours to fully charge the camera.
Charging Methods:
1) Use a USB cable to connect camera's USB port to an
USB port on your computer (powered on) or the included
USB power adapter (connect to a power outlet).
2) Attach camera to the docking bay. Use a USB cable to
connect the docking bay to an USB port on your computer
(powered on) or the included USB power adapter
(connect to a power outlet).
5.16 H.264 and H.265 Video Coding
Please make sure you are using the correct video coding
to suit your computer. H.264 is compatible with older
windows operating systems and older MAC OS. H.265 is
17