myGEKOgear Aegis 200 Manuel De L'utilisateur page 12

Loop
Recording
Split Time
Slides Show
Infrared
Motion
Detection
Record
Warning
Global
Positioning
Time Zone
Language
When on, camera will overwrite
the oldest video file with the
most current video file once its
memory is full.
While recording video, the
camera will automatically split
its recording into files of this
length.
When on, viewing photo file will
start a slideshow where each
photo will be shown for around
5 seconds.
When set to manual, you will
need to hold Snapshot button to
turn IR LEDs on/off. When set to
Auto, these lights will activate
automatically based on the light
sensor's reading.
When on, camera will start
recording when front movement
is detected by the lens.
When on, you will hear a voice
confirmation; When off, voice
confirmation is disabled.
When GPS is on, position of
coordinates will show on the
video footages. Then you put
the coordinates into Google
Earth, that giving you the exact
positioning of the footage
recorded.
Adopt local time in real time
zone
The language of the text in
camera interface
10
Off, On
1 min, 3min, 5 min,
10 min, 15 min, 30
min, 45min
Off, On
Manual, Auto
Off, On
Off, On
Off, On
-12 to +12
Default 0
English, 繁體中文,
Pусский,
JezykPolski, French,
Portuguese