Matco Tools MCL20RG Instructions De Fonctionnement page 5

JAW ASSEMBLY JIG INSTRUCTIONS
Ref. 13
JAW PUSHER
JAW HOUSING
Ref. 14
SPRING
1 . Insert the jaw assembly jig into the jaw case .
2 . Place the jaws in the jaw case . The assembly jig keeps the jaws apart .
3 . Place the jaw housing into the jig and flip upside down .
4 . Once upside down make sure all 3 jaws poke out of the housing evenly before removing the jaw assembly jig .
5 . After removing the jig place the jaw pusher & spring into the housing keeping tension on the spring .
6 . Place assembled jaw case back into tool keeping tension on spring .
7 . Screw jaw case back on tool and tighten .
8 . Place nose cover back on tool and tighten . Test tool with rivets for proper operation .
1.
5.
MCL20RG
MCL20RG 20V+ 1/4" Brushless Rivet Gun
Ref. 12
JAW CASE
Ref. 10
2.
6.
Ref. 11 Ref. 38
JAWS JAW
ASSEMBLY JIG
3.
7.
5
4.
8.
rev. 05/11/20