Matco Tools MCL2012IW Instructions De Fonctionnement

LLAVE DE IMPACTO 1/2" DE ION DE LITIO 20V
CLÉ À PERCUSSION 1/2" 20V LI-ION
20V LI-ION
1
2
IMPACT WRENCH
Operating Instructions • Warning Information • Parts Breakdown
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1/2"
Weight (Tool With Battery) . . . . . . . . . . . . . . .6 .8 lbs .
Height (Tool With Battery) . . . . . . . . . . . . . . 10-1/2"
Battery Type . . . . . . . . . . . . . . . . . . . . . . .20V Li-ion
No Load Speed . . . . . . . . . . . . . . . . . . . . 2200 RPM
Blows per Minute . . . . . . . . . . . . . . . . . . . . . . 2100
WARNING
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR
HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
MCL2012IW
S P E C I F I C A T I O N S
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
Breakaway Torque . . . . . . . . . . . . . . . . . . 725 ft/lbs
Applied Torque . . . . . . . . . . . . . . . . . . . . . . . . . 425
Charging Time . . . . . . . . . . . . . . . . . . . . . < 60 min .
Compatible Battery . . . . . . . . 18-20V Infinium Li-ion
Compatible Charger . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . MCLCHRG, MCL1840CHRG, MCLCHRG5
WARNING
Copyright © Professional Tool Products, 2016
1
MCL2012IW
MCL2012IW
All rights reserved.
02/01/16