Safety Information - Conrad 1302513 Mode D'emploi

5. Safety information

The guarantee/warranty will expire if damage is incurred resulting from non-compliance with these
operating instructions. We do not assume liability for any consequential damage.
Nor do we assume any liability for damage to property or personal injury caused by improper use
or failure to observe the safety instructions. In such cases the warranty/guarantee is voided.
Dear Customer: The following safety information is intended not only for the protection of the device but
also for the protection of your health. Please read the following items carefully:
• For safety reasons, any unauthorized conversions and/or modifications to the product are not permitted.
• This device is a protection class I product. The only permissible voltage source is a proper earthed
mains socket (100 - 240 V / 50/60 Hz) of the public mains.
• The mains socket must be close to the device and easily accessible.
• Anyone operating, installing, setting up, commissioning or servicing this light system must be trained
and qualified properly and observe these operating instructions.
• Never look straight into the light source during operation. The bright light flashes may temporarily impair
your eyesight. Apart from this, epileptic fits may be triggered under certain circumstances in persons
sensitive to such lights. This particularly applies to epileptics.
• LED radiation may be dangerous if the LED beam or a reflection enters the unprotected eye. Therefore,
familiarise yourself with the statutory regulations and measures of precaution for the operation of this
kind of LED device before using the device.
• Never touch the mains plug with wet or damp hands! There is a risk of potentially fatal electric shock!
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket on all
poles (e.g. via the respective circuit breaker and FI switch) and then carefully pull the mains plug from
the mains socket. Never use the product if the mains cable is damaged.
• When installing the device, make sure that the mains cable is not squeezed or damaged by sharp edges.
• This product is not a toy and not suitable for children. Children cannot judge the dangers involved when
handling electrical devices.
• Never place containers containing liquids, e.g. glasses, buckets, vases or plants on the device or in its
vicinity. Liquids may get into the housing and impair electrical safety. This also poses great danger of
fire or potentially fatal electric shock! If this is the case, first power down the respective mains socket on
all poles (e.g. switch off circuit breaker and FI switch) and then pull the mains cable from the socket. Do
not operate the product anymore afterwards, but take it to a specialist workshop.
• Do not expose the device to any high temperatures, dripping or splashing water, strong vibrations or
heavy mechanical stress.
• Do not place any open sources of fire, such as burning candles, on or directly next to the device.
• Consult an expert if you are unsure as to the function, safety or connection of the product.
• Never operate the device unattended.
• Only operate the device in moderate climates, never in tropical climates.
• Do not leave packing material unattended. It may become a dangerous toy for children.
• In commercial institutions, the accident prevention regulations of the Employer's Liability Insurance As-
sociations for Electrical Systems and Operating Materials are to be observed.
• If you are not sure of the correct connection or if there are any questions that are not covered by the
operating instructions, do not hesitate to contact our technical support or another specialist.
22