LENCO Xemio-768 Mode D'emploi page 12

date" as you want;
 Choose "Set date format" then choose
DD MM YYYY"" which format as you desired.
 Choose " Set date", a date interface will appear to set;
 The "MM / DD / YY" set item is highlighted, press M button to switch in
between day, month and year which you want to set. And adjusting them
to current date by pressing the
 Finally, you need to press the
the screen will back to previous menu.
d. Language:
This player can use difference OSD languages.
 To set the language, choose "Language", and then choose which
language as you desired by using
e. Information:
You can view about the player information and Micro SD memory card
status, such as firmware version, remaining memory space available and the
number of support media files available in player.
 In Setup menu, choose "Information" by using
button, a list appears to use.
 Choose "Player information" or "Disk space" which you want to view.
f. Factory Settings:
 In Setup menu, choose "Factory settings", a dialog "Restore factory
settings?" will pop up to confirm;
 Choose "Yes" to confirm. Or, "No" to abort.
 Press
button to exit Setup menu.
7. Use Bluetooth Menu
To Turn On the Bluetooth Function:
 From the main menu, choose the Bluetooth menu by using
and buttons, a Bluetooth sub menu appears.
Search and Pair Bluetooth device.
NOTE: Before pairing, please make sure your Bluetooth Receiver Device
supports the Bluetooth A2DP profile.
 Keep the device within a 1 meter range of your Bluetooth receiver device.
Power it On and set it into searching/pairing mode;
 Turn the BT On in "BT Control" menu.
 Then, in the Bluetooth list menu choose "Search Device" by using the
/ and
10 ~ 20 seconds. Devices found will be listed on the screen.
 Choose your device from the on screen list and choose "Pair/connect" by
using the
buttons, the device will start searching for approximately
/ and
""YYYY MM DD / MM DD YYYY /
/ button.
button to confirm the adjustment and
/ buttons and
button.
12
button.
/ button and
/