Matco Tools MWLUHFLG2 Mode D'emploi page 5

ALL FLOOD AND UNDERHOOD LIGHTS
Verify the slide bracket is facing down
(opposite to the grabbing end of the arms).
Install the slide bracket on the bar by pressing
the tab and sliding it into the bar.
Connect the two arms together.
Secure the arms by tightening the supplied
Phillips head screws.
From the side where the tab button is located,
slide the light into the bracket by sliding the
light's handle into the bottom of the slide
bracket receiver.
ALL FLOOD AND UNDERHOOD LIGHTS 5 02/01/20