Tecnik PRATIK PHF 812 Manuel De L'utilisateur page 6

DIPSWITCH SETTINGS
Dipswitches SW1 and SW2 are located behind on the top right of the white label. You can access them by
carefully removing the label and re-sticking it once congured as desired.
SW1: Adjusts the charge curve for various battery types with various combinations of DP1 and DP2
SW1/DP1 SW1/DP2 CHARGE CURVE
ON OFF IUIa-ACD for LEAD-ACID (wet) batteries
OFF OFF IUIa-GEL for Exide Sonnenschein GEL batteries only
OFF ON IUU0-GEL for GEL/AGM batteries of all other manufacturers
ON ON IUIUa-AGM for Discover AGM batteries only
SW2: DP1 adjusts the charging current and DP2 the output voltage.
SW2/DP1 CHARGING CURRENT
ON 15A
OFF 25A
SW2/DP2 BATTERY VOLTAGE
ON 12V
OFF 24V
SW1 SW2
DP1 DP1
DP2 DP2
OFF OFF OFF OFF
ON ON ON ON
DC OUTPUT CABLES (BATTERY)
www.tecnikchargers.com www.tecnikchargers.com
SW2
SW1
GREEN LED
YELLOW LED
RED LED
AUXILIARY RELAY CABLES
The auxiliary relay contact is
normally closed and opens
when the battery charger is
turned on. It can support a
maximum current of 1A on
inductive load or 2A on
resistive load.
AC INPUT CABLE