Maintenance - Crane EE-4109 Manuel D'instructions

and adjust the mist intensity control setting.

MAINTENANCE

Always be sure that the appliance is unplugged and switched OFF before cleaning or
attempting to store the item. NEVER PLUG OR UNPLUG UNIT WITH WET HANDS.
DO NOT leave water in water tank or water basin when unit is not in use as it may
result in the build up of mineral deposits and bacteria that can inhibit the output
efficiency of the humidifier. PLEASE NOTE that if water remains in the water tank for
more than a day or two, bacterial growth is possible. ALWAYS use fresh cool water
when using unit.
NOTE:
When removing water tank, water may accumulate under vapor lid and on the
bottom of the water tank. It is recommended to have a dry cloth ready to dry wet
surfaces.
CLEANING THE WATER TANK AND WATER BASIN
1. Fill water tank with add a few capfuls of our odorless Crane Humidifier Cleaner
and mix with water allowing the solution to stand for several minutes. Rinse
thoroughly with clean water before use. For heavily soiled surfaces apply the
cleaner and let it soak for a longer period of time. (If Crane Humidifier Cleaner is
unavailable, you can use white vinegar. Rinse the water basin with cool water
repeatedly until the vinegar smell is gone.)
2. Dry with a clean cloth or paper towel.
3. Wipe the water basin with a soft cloth dampened in the cleaner and water
solution. Rinse the water basin with cool water. DO NOT IMMERSE WATER BASIN
IN WATER.
4. Wipe all exteriors surfaces of the base with a soft, dry cloth. Do not immerse the
base in water or use water to clean the base. As with any electrical appliance, an
electric shock may result or the humidifier may be damaged.
NOTE: Please read the label on the Cleaner label before using.
GENERAL MAINTENANCE AND CLEANING
Before any cleaning operation, switch the humidifier off and unplug it.
1. Always unplug the unit before cleaning.
2. The humidifier must be drained and cleaned before storing.
3. Once unplugged the exterior of the unit may be cleaned by wiping with a dry cloth.
Caution: The ON/OFF (ON = "I", OFF = "O") switch must be thoroughly dry before
unit is again plugged into power source.
4. There may be some lime deposits in the nebulizer, particular in areas with hard
water. Overcome this drawback by cleaning the nebulizer with our odourless Crane
Humidifier Cleaner (if Crane Humidifier Cleaner is unavailable, you can use white
vinegar. Rinse with cool water repeatedly until the vinegar smell is gone.) on a soft
cloth regularly, as follows:
A. Dampen a cloth with the cleaner and wipe the nebulizer gently, until the lime
deposits disappear completely.
B. Rub down gently with a dry cloth and remove remains of humidity.
C. Do not rub the nebulizer with solid objects.
D. Do not use any other humidifier cleaner or harsh chemical as this may result
in possible damage to your appliance and void your warranty.
5. When cleaning the water basin do not place the nebulizer directly under the water
8