Axis 225FD Guide D'installation page 4

Follow these instructions to install the pendent kit
1. Route power and network cables through the wall mount and allow to
extend as shown. Install the wall mount bracket in the desired posi-
tion.
Teflon tape
Cables
Wall mount bracket (1.5 inch pipe)
(US only)
2. To seal the pendent attachment, use the supplied teflon tape as shown
in the illustration.
AXIS 225FD Pendent Kit - Installation Guide
Cables
Teflon tape
Wall mount bracket (1.5 inch to 22 mm adapter)
(Europe only)
1.5 inch pipe
22 mm pipe
1.5 inch-22 mm adapter