Installation - Klarstein METROBREEZE NEW YORK SMART 7K Mode D'emploi

EN
28

INSTALLATION

Installing the exhaust hose
Screw the exhaust hose
anticlockwise to the air outlet at the
rear of the unit.
Important installation instructions
• The exhaust hose should
be as straight as possible.
Incorrect installation will
affect the operation of the air
conditioner.
• Prevent the exhaust hose from
bending too much.
• Make sure that the air can
flow smoothly into the duct.
• The exhaust hose is specially
designed for this model. Do
not replace or extend it, as the
unit will not function properly.
Installing the device
Place the unit on a flat surface at least 50 cm
from all sides of the unit. Attach the other end of
the exhaust hose to a nearby windowsill.