Sentiotec PRONET 1-027-363 Mode D'emploi page 28

Instructions for installation and use
Fig. 2: Function
RS485
RJ45 socket
Setting up a connection (Fig. 1: Connections on page 7)
● Connect your sauna control unit to the web server (connection 1 or 2).
► Use the network cables included with the delivery for connection.
● Connect the web server to your LAN network/WLAN router (Ethernet 4).
► Use the network cable included with the delivery for connection.
● Connect the power supply unit included with the delivery to a voltage supply
(5 V DC mains input 3).
Checking the connection: (see Fig. 1: Connections on page 7)
After successfully connecting the web server and the sauna control unit,
the transmission control light 6 and the reception control light 7 start
to flash. This indicates the web server is sending and receiving data.
If this is not the case, check the following items:
– The sauna control unit is switched on.
– The web server has a voltage supply and is operating.
– The cable connection between the sauna control unit and the web
server is in order.
– The sauna control unit is operating with software version V1.03 or higher.
WORLD OF WELLNESS
ETHERNET
p. 8/20
WEB