Adjusting The Cross Over Frequency - JVC KW-AVX740 Manuel D'instructions

Adjusting the sound precisely
1 1
Perform steps
preset sound mode," then...
2
Select a band.
3
Adjust the sound .
Reset Changes level of Low/Mid/
High to 0.
Freq Selects frequency.
Q Adjusts the width of the
frequency.*
Bass Activates/deactivates bass.*
SW Level Adjusts subwoofer level.
The adjustments are stored and <User> is
activated.
• The adjustments are memorized until you
adjust sound again.
• To make adjustment for other bands, repeat
2 3
steps and .
1
Fixed for "High" band.
*
2
Only for "Low" band.
*
2
and of "Selecting a
1
2
Adjusting the cross over
frequency
1
AV Menu
On < > :
2
3
Select the item to adjust, then make
adjustment.
Adjusts the cross over for front or rear speakers
(high pass filter).
Adjusts the cross over for subwoofer (low pass filter).
Adjusts the cross over frequency.
Selects the phase for the subwoofer.*
Adjusts the subwoofer level.
Not selectable when <Freq> is set to <Through>.
*
32