Publicité
Les langues disponibles
Les langues disponibles
jewelry, or long hair can be caught in moving parts. Air vents on the tool
often cover moving parts and should be avoided.
•
Wear the proper personal protective equipment when necessary. Use ANSI
Z87.1 compliant safety goggles (not safety glasses) with side shields, or
when needed, a face shield. Use a dust mask in dusty work conditions. Also
use non-skid safety shoes, hardhat, gloves, dust collection systems, and
hearing protection when appropriate. This applies to all persons in the work
area.
•
Do not overreach. Keep proper footing and balance at all times.
•
Do not use the tool when tired or under the influence of drugs, alcohol or
medication.
CAUTION
TABLE USE AND CARE
•
Do not force the table. Products are safer and do a better job when used in
the manner for which they are designed. Plan your work, and use the
correct product for the job.
•
Check for damaged parts before each use. Carefully check that the product
will operate properly and perform its intended function. Replace damaged
or worn parts immediately. Never operate the product with a damaged part.
•
Store the product when it is not in use. Store it in a dry, secure place out of
the reach of children. Inspect the tool for good working condition prior to
storage and before re-use.
•
Use only accessories that are recommended by the manufacturer for use
with your product. Accessories that may be suitable for one product may
create a risk of injury when used with another tool. Never use an accessory
that has a lower operating speed or operating pressure than the tool itself.
•
Keep guards in place and in working order. Never operate the product
without the guards in place.
•
Do not leave the tool running unattended.
MAIN PARTS OF PRODUCT
Reference
1
2
3
Subassembly
Handle
Pump Lever
Table
Publicité
