• The adjustable front legs should be adjusted to make sure your appliance is level
and stable. You can adjust the legs by turning them clockwise (or in the opposite
direction). This should be done before placing food in the freezer.
• Before using your freezer, wipe all parts with warm water added
with a tea spoonful of sodium bicarbonate, and then rinse with
clean water and dry. Place all parts after cleaning.
• Install the distance adjustment plastic (the part with black vanes
at the rear) by turning it 90° as shown in the figure to prevent the
condenser from touching the wall.
• Freezer should be placed against a wall with a free distance not exceeding 75 mm.
Before Using your Freezer
• When it is operated for the first time or after transportation, keep
your freezer in the upright position for 3 hours and plug it on to
allow efficient operation. Otherwise, you may damage the com-
pressor.
• Your freezer may have a smell when it is operated for the first time; the smell will fade
away when your fridge starts to cool.
PART 2.
HOW TO OPERATE THE FREEZER
Thermostat Setting
The freezer thermostat automatically regulates the inside temperature of the
compartments. By rotating the knob from position 1 to 3, colder tempera-
tures can be obtained. "•" position shows thermostat is closed and no cool-
ing will be available.
Important note: Do not try to rotate knob beyond 1 position it will stop your appliance.
Freezer Thermostat Setting;
1 - 2 : For short-term storage of food in the freezer compartment, you can set the
knob between minimum and medium position.
3 - 4 : For long-term storage of food in the freezer compartment, you can set knob
to medium position.
5 : For freezing the fresh food. The appliance will run for colder temperatures.
Note that: the ambient temperature, temperature of the freshly stored food and how
often the door is opened, affects the temperature in the freezer. If required, change the
temperature setting.
EN - 25 -