Installing And Operating Your Freezer - Burg BGS88A++ Guide D'utilisation

• When taking ice made in the freezer, do not touch it, ice may cause ice
burns and/or cuts.
• Do not touch frozen goods with wet hands! Do not eat ice-cream
and ice cubes immediately after you have taken them out of the
freezer!
• Do not re-freeze frozen goods after they have melted. This may cause health issues
like food poisoning.
• Do not cover the body or top of freezer with lace. This affects the performance of your
freezer.
• Fix the accessories in the freezer during transportation to prevent damage to acces-
sories.

Installing and operating your freezer

Before starting to use your freezer, you should pay attention to the following points:
• Operating voltage for your freezer is 220-240 V at 50Hz.
• The plug must be accessible after installation.
• There can be an odor when you first switch on the appliance. It will disappear after
the appliance starts to cool.
• Before making the connection to the power supply, ensure that the voltage on the
nameplate corresponds to the voltage of electrical system in your home.
• Insert the plug into a socket with an efficient ground connection. If the socket has no
ground contact or the plug does not match, we suggest you to call an authorized
electrician for assistance.
• The appliance must be connected with a properly installed fused socket. Power
supply (AC) and voltage at the operating point must with the details on the name
plate of the appliance (name plate is located on the inside left of the appliance).
• We do not take responsibility for damages that occur due to ungrounded usage.
• Place your freezer in a place that it would not be exposed to direct sunlight.
• Your freezer should never be used outdoors or left under the rain.
• Your appliance should be at least 50 cm away from stoves, Gas ovens and heater
cores, and should be at least 5 cm away from electrical ovens.
• When your freezer is placed next to a deep freezer, there should be at least 2 cm
between them to prevent humidity on the outer surface.
• Do not place heavy items on the appliance.
• Clean the appliance thoroughly, especially in the interior, before
use (See Cleaning and Maintenance).
• Installation procedure into the kitchen unit is given in the The instal-
lation procedure into the kitchen unit is given in the Installation
Manual. This product is intended to be used in proper kitchen units
only.
EN - 24 -