eufy Security T8900 Manuel De L'utilisateur page 4

STATUS LED
Sensor LED indicator Entry Sensor status
Flashing blue Adding to HomeBase
Flashing blue (Once) Sensor detects an open/close activity
Sensor battery is low or disconnects
Flashing red (Once)
from HomeBase
FAQ
1. What battery does the Entry Sensor use?
Entry Sensor uses a CR123A battery with 3V output.
2. How long does the battery last?
One CR123A battery usually lasts up to 2 years, but depends on the
usage.
Please visit our official website to download the user manual:
www.eufylife.com
03 ENGLISH
NOTICE
his product complies with the radio interference requirements
T
of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. For the declaration of conformity, visit the Web site
https://www.eufylife.com/.
Do not use the Device in the environment at too high or too low
temperature, never expose the Device under strong sunshine or too wet
environment.
The suitable temperature for the product and accessories is 0°C - 40°C.
RF exposure information: The Maximum Permissible Exposure (MPE) level
has been calculated based on a distance of d=20 cm between the device and
the human body. To maintain compliance with RF exposure requirement, use
product that maintain a 20cm distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS
SUB-1G Frequency range: 866~866.8MHz 868.2~869MHz
Sub-1G Max Output Power: 8.865dBm(ERIP for 868.2~869MHz); 11.746dBm
(ERIP for 866~866.8MHz)
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3-5, 80807
Munich, Germany
Anker Technology (UK) Ltd | Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, B11 2AA, United Kingdom
This product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
ENGLISH 04