Drying A Load Of Laundry - Midea MLE52S7AGS Manuel Du Propriétaire Et Instructions D'installation

DRYING A LOAD OF LAUNDRY

1.
Power on your dryer.
2.
Load your dryer.
3.
Select the appropriate cycle and options for the load.
4.
Start your dryer.
34
•
Press this Power button to power your dryer on.
•
Place only one wash load in your dryer at a time.
•
Mixed loads of heavy and light weight fabrics will dry
differently, which may result in lightweight fabrics being
dry while heavy fabrics remain damp at the end of a
drying cycle.
•
Add one or more similar items to your dryer when
only one or two articles of clothing need drying. This
improves the tumbling action and drying efficiency.
•
Overloading restricts tumbling action, resulting in
uneven drying as well as excessive wrinkling of some
fabrics.
•
•
•
Your favorite drying Cycle
Once you have set the cycle selector and option
function, you can push and hold the "My Cycle" button
for 3 seconds to memory this setting as your favorite
cycle before start the unit. The light beside the knob
will flash to confirm the memory with beeps.
•
You can finish this Step by just push the "My Cycle"
button once to use your favorite cycle or make some
additional change.
Pressing Start/Pause button will start the selected cycle.
To PAUSE cycle press Start/Pause button then open the
door. To resume operation after closing the door always
press Start/Pause. Opening the door during the operation
will instantly stop operation and will require to press Start/
Pause button to resume operation.
Select the appropriate cycle by Cycle
Selector according to the cycle chart on
page 35.
Select the appropriate optional function
by buttons according to the chart on
page 35.