DOOR REVERSAL PROCEDURE
1.
Unplug the power cord.
2.
Remove the two hinge screws from the door.
3.
Remove the door by lifting it.
4.
Using a flat-blade screwdriver, remove the
hinge hole cover.
5.
Install the hinge hole cover on the opposite side.
6.
Remove the 14 screws from the back cover and
then remove the back cover and the door pin.
7.
Remove the 8 screws from the inner
door and rotate the rest parts for
180 degrees.
8.
Assemble the inner door and the back cover, place
the door pin on the opposite side and then fasten
the 14 screws that removed in Step 6.
9.
Install the door on the frame-front and then
fasten the 2 screws that were removed in
Step 2.
30