Sony Bravia FW-85BZ35F Manuel De Référence page 5

2
Secure the LCD Monitor to the Stand.
Use the optional hardware listed as follows (not
supplied):
• M6 machine screws (screwed into the LCD Monitor's
rear cover).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of
the LCD Monitor). Make sure that there is no excess
slack in the rope or chain.
FW-85BZ35F
Screw hole on the rear cover
Rope or chain (not supplied)
Screw (not supplied)
M6 machine screw
(not supplied)
1.5 N·m/1,5 N·m
{15 kgf·cm}
FW-75/65/55BZ35F
Screw hole on the rear cover
M6 machine screw
(not supplied)
Rope or chain (not supplied)
Screw (not supplied)
US
1.5 N·m/1,5 N·m
{15 kgf·cm}
5
US