Publicité
Les langues disponibles
Les langues disponibles
RECOMMENDATIONS
• D o not insert the blade of the round head (2) more than 0.5
cm into the ear or the nose, since it could damage the tym-
panum or the membrane of the nose.
• M ake sure the head (2 or 3) is correctly adjusted to the base.
OPERATION:
• T his model works with an AA battery. To fit the battery, turn
the protective battery cover Fig. 1(8) to the left until the ▼
symbol is in line with the ▲, and pull on the cover. Fig. 2 Fit
the battery in the appropriate place with the negative termi-
nal (-) pointing to the head. Fig. 3.
• P ut the bottom cover back in position Fig. 1(8), ensuring that
the ▼ symbol is in line with the ▲ symbol, and turn it until
it is in line with the • symbol. Fig. 4
• W hen you turn it on Fig. 1(4), the light comes on Fig. 1(5),
to help you locate the hair.
To trim ear hair:
• U se the round head Fig. 1(2)
• T urn on the appliance and insert it in the exterior of the ear.
Fig. 5
• C arefully move the trimmer around the area with hair.
To trim nose hair:
• U se the round head Fig. 1(2)
• T urn on the appliance and insert it in the nose (do not insert
it more than 0.5 cm). Fig. 6
• R emove the nose hair by moving the appliance in small circles.
To set the type of cuts (beard, sideburns, neck hair, etc.):
• T urn the appliance off.
• T urn the round blade head Fig. 1(2) to the right and remove
it from the head base Fig. 1(1).
• F it the flat blade head Fig. 1 (3), adjusting it to the guide and
turn it to the left until it is correctly in place.
• S lide the blade along the desired cutting line without press-
ing on the skin to avoid cuts. Fig. 7
• U se the guide comb (10) to adjust the trimmed hair length.
Place it on the flat blade and select the cutting level desired.
The first time, we recommend that you start with the maxi-
mum length and gradually reduce it until you achieve the
desired effect.
9
Publicité
