15.7 Descaling pad
Descaling pad
The water quality in some locations is very hard so that the transducer
surface, the heating element surface, and descaling pad will have scale
formation.
Each time when you add water: The users need to clean transducer,
heating element surface with a cleaning agent and to clean the descaling
pad with clear water.
For cleaning the descaling pad please proceed as follows:
Remove the air flue as described below:
Remove the mist tube by screwing it counterclockwise (picture 1)
Hold the tail of the air flue and pull it up (picture 2)
Clear the water sink, take out the descaling pad and wash it with clear water (picture 3)
Assemble the mist tube and air flue back into the machine after cleaning.
16 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
16.1 Safety information
Attention
Please observe the following safety notices, before you commence with cleaning the
device:
► Switch the device off prior to cleaning it and during filling and unplug the plug from the
wall power outlet.
► Disregarding of the cleaning instruction can cause dangers to hygiene.
► The water should be changed each 2 days otherwise germ may breed.
caso AirVital Pro
36