Design And Function; Complete Overview; Safety Equipment; Rating Plate - Caso AirVital Pro Mode D'emploi

• The electrical outlet must be protected by a 16A safety cut-out switch.
• The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs
or gangs is prohibited because of the danger of fire that is involved with this.
• Make sure that the power cable is undamaged and has not been installed under the ice
maker or over hot or sharp surfaces.
• The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.

14 Design and Function

This chapter provides you with important safety notices on the design and function of the
device.
The AirVital PRO generates ultra fine mist due to the new hybrid evaporation technology

14.1 Complete overview

► Turn off the device using the switch on / off, disconnect the plug from the outlet, wait
about 60 min. To let the unit cool down and than fill with fresh water.

14.3 Rating plate

The rating plate with the connection and performance data can be founded beneath the
device.
caso AirVital Pro
Please note
1. Nozzle
3. Handle
5. Water level sensor
7. Mist tube
8. Water tank cover (and 8a waterfilter)
9. Transducer
11. Power cord
13. LED-Display
15. Mist level button
17. Set humidity button
19.Auto button

14.2 Safety equipment

If the tank is empty, the unit stops automatically.
2.Handle cap
4. Water tank
6. Air flue
10. Heating element
12. Aroma box
14. On/off button
16. Timer button
18. hot mist button
31