Description; Uses; Block Diagram - Ramiaudio AMC 403 Manuel Utilisateur

DESCRIPTION

On several STUDIO machines, manufacturers have removed the local monitoring control.
AMC 403 makes up for this lack, ingiving to the operator the possibility to monitor, control or settle
a local source. The operator will also be able to check level and phase.
A start interface allows to create pulses or hold states for all types of machine, and to keep the
automatic mute when it goes on air. The control modulation is available either in amplifier output
for passive speaker, or under +6 dBu format for amplified speaker.
The four inputs are mixed and an Antenna red interface affords to transfer the whole to a micro
openning. A stereo synchronous output of the mixing is also available

USES

Pre monitoring control for four machines with START interface.
Line monitoring
Level and phase control on four lines.

BLOCK DIAGRAM

IN
Sub-9 pts
Fem
Bypass
OUT
Start
Sub-9 pts
Stop
1 Mâle
2 (idem 1)
3 (idem 1)
4 (idem 1)
Mute
Mute
IN
IN / OUT Red Light
ENGLISH
Mute
-
Mute
+
-
Mute
+
Start Pulse / Hold
Interface
Fader
Stop Pulse / Hold
Start
Stop
OUT
Phase meter
5 W
14
.
PHONES
OUT Balanced
OUT
Rami - AMC 403