Publicité
Les langues disponibles
Les langues disponibles
Inputs
Connector
IN
option 0 dBu
IN
option +6 dBu
Modulation ext
option 0 dBu
Modulation ext
option 0 dBu
Outputs
Connector
OUT
option: 0 dBu
OUT
option: +6 dBu
PHONES
For headphones maximum level setting see page 17.
Distorsion
< 0,004% at 1000 Hz and nominal level
< 0,005% at 1000 HZ +19 dbU
Bandwidth :
10 Hz to 70 KHz à -1 dB.
Diaphony :
66 dB at 10 KHz.
Diaphony on mute : 106 dB at 1 KHz.
S/N at maximum level : 108 dBA
Power supply :
DC 12 Volts / 1A
Power :
15 watts
Warning !!!
The power supply of GEM 606 mains connector has three wires (2 poles + earth). Earth should imperatively be
connected to mains earth.
Never use this equipement without proper grounding.
Check quality of grounding.
Should noise or hum occurs when connected to other equipments, never disconnect grounding, use
insulating transformer on mains.
Never open the case without disconnecting mains
Avoid high temperature exposure.
Never expose the equipment to rain, snow or moisture. .
Using GEM 606 headphone amplifier, listening to high level an result in permanent damage to ears.
GEM 606 and its
EN60065, EN55013, EN55020, EN60555-2, et EN60555-3, d'après les
73/23/EEC, 89/336/EEC et 93/68/EEC.
ENGLISH
SPECIFICATIONS
Type
Balanced
XLR
Balanced
XLR
Balanced
Sub - D
Sub - D
Balanced
Type
Balanced
XLR
Balanced
XLR
Unbalanced
JACK
INFORMATIONS
power supply
complie with :
Impedance
Nominal level
15 KOhms
0 dBu
15 KOhms
+6 dBu
0 dBu
15 KOhms
15 KOhms
0 dBu
Impedance
Nominal level
100 Ohms
0 dBu
+6 dBu
100 Ohms
Adjustable from
68 Ohms
-
and 5,2 Veff on z=
Dimensions :
Weight :
22
Maximum level
+19 dBu
+25 dBu
+18 dBu
+24 dBu
Maximum level
+19 dBu
+25 dBu
5,2 Veff on z=
330 x 230 x 100 mm
4,5 Kg
dispositions de la Directive
GEM 606 - RAmi
Publicité
