Connecting The Camera; Connecting The Monitor - Conrad 85 63 40 Notice D'emploi

7.1 Connecting the camera

• Lay the camera power cable to the rear light of your vehicle.
To ensure safe connections between the cables, it is advisable to use the provided
cable connectors (see left).
Using the provided cable connectors:
A) Insert the cable to be tapped.
B) Insert the cable to be connected to it.
C) Lock the connector manually.
• Connect the red cable to the positive connection of the back-up light.
• Connect the black cable to an earthing point on the car body. Make sure that the
earthing contact with the body is good (remove paint from the contact surface if
necessary).

7.2 Connecting the monitor

The provided monitor allows you to connect a separate DVD player or similar
(optional).
If you want to connect a DVD player to the monitor, connect the video and audio
sockets of your DVD player with the video and audio connectors of the monitor.
The yellow RCA socket is used for the video signal, the red socket for the right audio
signal and the white socket for the left audio signal.
30