Watts PWDWLCV2 Manuel D'installation, D'utilisation Et D'entretien page 4

STEP 2
1
Step a – Under the sink - on to the threaded faucet stem in order
first slide on the plastic spacer (Item 7), the washer (Item
8), the slotted washer (Item 9), and lastly secure with nut
(Item 10) .
Step D – Locate the blue 1/4" tube in the faucet parts bag . Remove
a brass nut (Item 13), plastic sleeve (Item 12) and insert
(Item 11) from the parts bag . To assemble, place the brass
nut on the blue tube first, then the sleeve (small tapered
end of sleeve must point to the end of tube) and then push
the insert all the way into the end of the tube .
Step E – Insert the blue tube into the end of the faucet shank and
use a wrench to tighten the brass nut securely .
NOTICE
DO NOT overtighten nut.
3
5
7
9
11
13
2
4
6
8
10
12
4