Publicité
Les langues disponibles
Les langues disponibles
CHARGE AND BATTERY RECOMMANDATIONS
To charge the battery, follow these steps :
•
Connect the input of micro USB cable to a USB plug or a charging adaptor.
•
Connect the output to the plug at the back of the appliance's base.
•
The LED indicator light will flash red while charging
•
When the charge is complete, the LED indicator light will flash green.
•
After the charge, always disconnect the USB cable.
Notes :
•
The appliance won't charge is the cable is defective. Try another cable.
•
While in use, when the battery is running low, the LED indicator light will flash red.
•
While in use, when the battery is empty, the appliance will shut off and the LED
indicator light will flash flickering red.
USE
•
To start the appliance, press the On/Off button for 3 seconds. The speed and natural
wind LED indicators will light up.
•
To switch off the appliance, press the On/Off button for 3 seconds.
•
Use the fan continuously for maximum 4 hours. Make a pause of minimum 1 hour or
until the appliance is completely cooled down before using it again.
Speed settings :
•
There is 4 speed levels : low – medium low – medium high – high
•
Set the desired speed by pressing the On/Off button : the speed LED indicator will
flash one more blade for each level.
•
The natural wind mode mimics the feeling of a natural breeze and switch speeds itself.
You can activate it by pressing the On/Off button one more time after reaching the
4
speed level.
th
Vertical inclination (high-low) :
Adjust it up to 40° by orienting the appliance motor block in the desired angle.
CLEANING AND MAINTENANCE
•
Shut off and unplug the appliance before cleaning it.
•
Clean the appliance with a soft slightly damped cloth; do not use abrasive products.
•
Do not immerse in water or other liquid
•
Use a vacuum cleaner to remove dust and lint.
•
If the fan will not be used for long periods, it must be protected from dust and humidity.
5
TKG VT 1048 USB
Publicité
