Toastess Elegance Tourelle TFC-101 Mode D'emploi page 12

Booklet TFC-101_VF2
DELAYED BREW CYCLE
To Set the Clock
1. To set the time, press and hold the Hour or Minute Button for 2 seconds.
'Time Set' will start flashing in the upper left hand corner of the Digital
Clock Display Window.
2. Press the Hour Button to advance the clock to the desired hour. Press the
Minute Button to advance the clock to the desired time.
3. Press the Program Button again or wait 15 seconds and the time change
will be accepted.
To Program the Brew Time
1. Press and hold the Program Button for 2 seconds. The 'Prog' symbol will
start flashing in the lower right corner of the Display Window.
2. Press the Hour Button to advance the clock to the desired time. Press the
Minute Button to advance the clock to the desired time.
3. Press the Program Button or wait 15 seconds and your set time
will be accepted.
4. To activate the Delayed Brew Cycle press the Auto On Button. The 'Auto'
symbol will illuminate in the upper right hand corner of the
Display Window.
5. The Coffee Maker will now begin the brewing cycle at the programmed
time. When the Coffee Maker reaches the programmed time and starts
the brewing cycle, the red indicator light will illuminate.
NOTE: The unit will continue to attempt to brew at the programmed
time each day until the 'AUTO' button is turned off. The red 'On' Indictor
Light and water tank will illuminate each time the attempt to brew is
made. If there is no water in the Reservoir, the unit will automatically
shut off after 2 hours.
5/25/04 3:14 PM Page 12
5