Télécharger Imprimer la page

Zeegma Molen Chef Manuel De L'utilisateur page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
11. The device must not work continuously for more than 10 minutes.
EN
12. Never activate reverse rotation when the device operates (REV key).
13. Wait for at least one minute until the grinder stops working completely.
Otherwise it may lead to atypical sound, vibrations, or electric spark in the
device. This may damage the product. After use, food remains may accumulate
in the head. It is natural. The ground food may contain grains of black metal
powder. Remove them.
14. To make sure the product does not get blocked, do not put too much pressure.
15. Do not switch the device on when the electrical fuse is active.
16. Never replace or repair parts of the device or entire device on your own.
17. If the feeder cable is damaged, it must be replaced by the manufacturer or
authorized service centers. A wrong repair may result in serious danger to
the user.
The product complies with requirements of EU directives.
Pursuant to Directive 2012/19/EU, this product is subject to selective collection.
The product must not be disposed of together with household waste as it may
pose a threat to the environment and human health. Worn-out product must be
handed over to electrics and electronics recycling point.
Before first use:
1.
Make sure the electric voltage specified on the device label complies with the
electric voltage at your home.
2.
Carefully wash all parts (except for body) in warm water with soap.
List of parts (fig. A)
1.
PUSHER
2.
FEED TRAY
3.
LOCKING KNOB
4.
BODY
5.
ON/OFF SWITCH
6.
REVERSE GEAR (REV KEY)
7.
HEAD
8.
WORMSHAFT
This device has a special locker for additional accessories. To open it, just press
the locker. Close the locker after every use.
6
9.
BLADE
10.
CUTTING PLATE (SMALL HOLES)
11.
CUTTING PLATE (MEDIUM HOLES)
12.
CUTTING PLATE (LARGE HOLES)
13.
FIXING RING
14.
SAUSAGE ATTACHMENT
15.
KEBBE ATTACHMENT
16.
EXTRAS LOCKER

Publicité

loading