Foster KE 60 MF 9 Mode D'emploi page 9

Changing the Clock Alarm Tone
1 Press + and - at the same time. You will
notice a dot light up between the + and –
symbols on the clock display.
2 Press MODE and you will see "ton1" light
up on the clock display.
3 The alarm tone can be changed by
repeatedly pressing on the - symbol.
Programming the Timer Alarm
1 Press on MODE. The symbol
on the clock display.
2 Select the length of time after which you
want the alarm to sound by pressing on
+ or -.
3 The alarm will be con rmed by two
consecutive beeps and the display will
show the current time. The symbol
remain lit.
4 At the programmed time, the alarm will
sound and the symbol
5 Press on any symbol to turn o the alarm.
The symbol will continue to ash.
6 Keep pressing MODE until the function is
switched o .
You can see how much time is left at any
time by pressing MODE until the symbol
ashes.You can then change the selected
time by pressing + or -. The beep you hear
will con rm the new time has been set.
Programming Cooking Time
1 Press MODE until you hear a beep.
Press MODE again and the word "dur" will
appear on the clock display.
2 Select the cooking time by pressing
+ or -.
3 You will then hear a beep and the
present time and the word "AUTO" will light
up to show that the oven will switch o
automatically.
will ash
will
will begin to ash.
4 Select a cooking function and
temperature.
5 When the set cooking time is over, the
oven will turn o and an alarm will sound.
6 Press any symbol to turn o the alarm.
The oven will remain o and AUTO will
continue to ash.
7 Keep pressing on MODE until you hear a
beep to show the function is now o . Then
set the controls to
You can see how much time is left and
change the remaining cooking time.
Follow the previous instructions.
To cancel this function, just press + and -
at the same time.
Programming the Cooking Stop Time
1 Press MODE until you hear a beep. Then
press MODE until the word "End" appears
on the clock display.
2 Select the cooking stop time by pressing
+ or -.
3 You will then hear a beep and the
present time and the word "AUTO" will light
up to show that the oven will switch o
automatically.
4Select a cooking function and
temperature.
5 When it is the time for cooking to stop,
the oven will switch o and an alarm will
sound.
6 Press any symbol to turn of the alarm.
The oven will remain o and AUTO will
continue to ash.
7 Keep pressing on MODE until you hear a
beep to show the function is now o . Then
set the controls to
You can use this function even if you are
cooking with the oven. If this is the case,
follow all of the above instructions except
No. 4.You can see the stop cooking time at
any time by following instruction No.1.
to switch o the oven.
to switch o the oven.
User´s guide
English
9