Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
MaxLite BayMax Linear High Bay Eco Series
®
Installation & Operation
C: Surface Mounting Installation
(mounting kit available separately)
Materials Required (Figure C-1):
One (1) LED fixture BLHE Series
Two (2) surface mount brackets (not included)
Four (4) anchors (not included)
Four (4) Tapping screws (not included)
1. Place the surface mount bracket as shown in Figure C-2.
Four (4) hexagonal head screws (not included)
2. Screw the hexagonal head screw into the rivet nut to fix the surface
onto the fixture body. (Figure C-3)
mount bracket to the fixture body. Install both surface mount brackets
3. Measure the distance between the two holes on the surface mount
bracket. (Figure C-4)
4. Measure the distance between the two holes on each surface mount
bracket. (Figure C-5)
5. Record the measurements and mark the wall where the fixture will be
installed. (Figure C-6)
6. Nail an anchor at each mark. (Figure C-7)
7. Install screw as shown at each of the four marks. (Figure C-8)
8. Lift the fixture to the wall to ensure that each tapping screw passes through the
center hole of the mounting bracket. (Figure C-9)
9. Slide the fixture to the position shown in Figure C-10. This will ensure that the
fixture stays in place.
D: Stem/Pipe Mounting Installation
(mounting kit available separately)
Materials Required (Figure D-1):
BLHE Series
One (1) LED fixture
One (1) Surface Mount Bracket
Two (2) Bracket Covers
1. Remove the outlet plate. (Figure D-2)
Four (4) Hexagonal Head Screws
2. Screw the hexagonal head screw into the rivet nut to fix the surface mount bracket in place. (Figure D-3)
3. Cover the surface mount bracket with the bracket cover. One end of the cover is inserted into the hole of the
both sides of the bracket. (Figure D-4)
drive cover plate, and the other end is fixed on the surface mount bracket by screws. Install cover as shown on
© Copyright 2022. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: info@maxlite.com
BLHE3 Series
Page: 3
REV: 03/30/22
Publicité
