Kiwi KCM 7596 Mode D'emploi page 6

Adjust the coffee temperature
Depending on user preference, adjust the coffee temperature by pressing the small cup or
large cup button . There are 7 temperature levels in total: the default setting is the 3rd level,
which could be adjusted upward by 4 levels or downward by 2 levels. Insert the adaptor, turn
on the machine to enter stand by mode. (The on/off button is in red), adjust the temperature
as shown below:
Temperature level
• Temperature level 1: Press for 3 s then press once small button
and flashes 1 time
• Temperature level 2: Press for 3 s small button and flashes 2 time
• Temperature level 4: Press for 3 s large button and flashes 1 time
• Temperature level 5: Press for 3 s large button then press once
and flashes 2 time
• Temperature level 6: Press for 3 s large button then press twice
and flashes 2 time
• Temperature level 7: Press for 3 s large button then press 3 times
and flashes 2 time
• Temperature reset to level 3:
Press for 3 s small button and flashes 2 time
CLEANING AND MAINTENANCE
Switch off and unplug the coffee maker before cleaning and performing maintenance.
Water tank: Take out the tank, discard residual water, clean it with a soft cloth and rinse it
with water.
Drip tray & capsule adaptors: Take them out, discard water or coffee residue, clean them with
a soft cloth and rinse with water.
Exterior: Wipe the exterior with a soft cloth at a regular interval. Keep the appliance clean,
especially the switches and plug.
Note: never use a dishwasher to clean any parts of the coffee maker.
6