Philips Vision Excel HR8893/15 Mode D'emploi page 7

4 Set to MIN for minimum suction power.
Use minimum suction power for vacuum cleaning curtains, table
carpets, etc.
C
Some types are equipped with infrared remote control.
With the infrared remote control you can set the suction power to
one of 5 different suction power settings.When you switch the
appliance on, it will always start running at the highest suction power
setting.
C
By pushing the - button, you will reduce the suction power by one
setting.
C
By pushing the + button, you will increase the suction power by
one setting.
C
Push the standby button to temporarily switch the vacuum
cleaner off, for instance when you have to move some furniture.
To continue vacuum cleaning, simply press the - button or the +
button.The appliance will start operating at the previously selected
suction power setting again.
Parking the tube
C
Place the tube clip in the parking slot.You can slide the clip along
the tube to adjust the parking height of the tube.
ENGLISH
7