Philips Vision Excel HR8893/15 Mode D'emploi page 9

C
4 Remove the full dustbag from the holder by pulling the
cardboard tag.
C
5 Slide the cardboard front of the new dustbag into the two
grooves of the dustbag holder.
C
6 Slide the dustbag into the dustbag holder as far as possible. Re-
insert the dustbag holder into the vacuum cleaner.
You cannot close the cover if no dustbag has been inserted.
Replacing filters
C
1 Every time you empty or replace the dustbag, take the
Permanent Motor Protection Filter out of the appliance and
clean it by shaking it over a dustbin.
C
2 Press the Permanent Motor Protection Filter firmly back into
its holder in its original position.
ENGLISH
9