SC Lexicon Manuel D'utilisateur page 51

SC LEXICON – COMMISSIONING OF THE DEVICE
Power On / Off
Press the Fire button 5 times in quick succession to turn the device on� Turn it off in the same way, by pressing the
Fire button quickly 5 times� We recommend turning the device off during transport or if it will not be used for a
long period of time�
Vaping
While holding the fire button of your e-cigarette, inhale the vapor slowly and continuously through the mouth-
piece of your clearomizer� Release the fire button while exhaling the vapor�
Lock/unlock the "Up" and "Down" Adjustment Buttons
With the device turned on, hold down the "Up" and "Down" buttons simultaneously for two seconds until the dis-
play shows "Lock� " The adjustment buttons are now locked� To unlock the buttons, hold them down for another two
seconds until the display shows "Unlock� " This function helps you avoid accidentally changing your vape settings�
Rotating the Display
With the device turned off, hold down the "Up" and "Down" buttons simultaneously for two seconds� The display
will rotate by 180 degrees� This function allows you to read your settings from two different perspectives�
Charging and Updating the Device
Please note that you are using high-current cells with a constant discharge current ≥ 25 A� The Micro USB port is
located below the adjustment buttons� Using a QC USB charging cable, you can connect the device in order to
charge it or to connect it to a PC in order to download a software update� An LED light will signal the beginning of
the charging process by lighting for five seconds�
We recommend that you charge the battery with an external charger because the charging process is optimized
and much faster by doing so�
49