Commissioning Of The Device - SC Lexicon Manuel D'utilisateur

SC LEXICON – COMMISSIONING OF THE DEVICE
Operating Instructions
Fully charge the necessary and replaceable 18650 batteries before first use� Please take note of the positive and
negative poles in the battery compartment� Ensure that there is no visible damage to the surface of the battery
cells� The device has a 510-pin connection with a spring-loaded connector, making it suitable for a variety of
clearomizers�
Notes on Cleaning
Use a dry cloth or a cotton swab to clean the device�
How to install the Battery
Open the battery compartment by lightly pulling up the cover and place the charged 18650 batteries in the device
according to the poles indicated� Close the battery compartment�
1
48
2
Note: If the display does not light up
after switching the device on, make sure
that you have inserted the batteries
correctly and that they have sufficient
power� If the device still cannot be swit-
ched on despite fulfilling all the afore-
mentioned prerequisites, please contact
our customer service department�