Husqvarna 81302925000 Mode D'emploi page 4

4
2
3
6
1
4
3
Scope of supply:
1x throttle grip (1)
1x cam 100 (1 KTM) (A)
1x cam 200/300 (2 KTM) (B)
1x cam 400/500 (4 KTM) (C)
1
- Slide back the rubber cover (2).
6
5
- Remove the screws (3) and the cover (4).
- Take the throttle twist grip (5) off of the handlebar and detach the
throttle cable wire (6).
- Mount the corresponding cam (A), (B) or (C) on throttle grip (1)
(included).
- Attach the throttle cable wire (6) to the throttle twist grip (1)
(included).
Cam 100 (1 KTM) (A)
1
Diameter as in series, recommended for optimal terrain conditions
(optimal traction), for sandy to clayey surfaces.
Cam 200/300 (2 KTM) (B)
Recommended for average terrain conditions (moderate traction), for
sandy to hard surfaces.
Cam 400/500 (4 KTM) (C)
Recommended for slippery to muddy terrain conditions, for loose, stony
or rocky surfaces, and for technically challenging routes.
- Push the throttle twist grip (1) onto the handlebar.
- Position the cover (4) and mount with the screws (3).
- Mount the rubber grip.
NOTE:
When using closed handguards, remove the cap (7).
7
Check the throttle grip to ensure it moves easily.
Check the play in the throttle cable (see the Owner's Manual).