Start-Up And Operation - Klarstein VULSINI Mode D'emploi

Note: When you switch on the heater, the time will light up. After 60 seconds the
heater will automatically switch off. You can switch it on again with any button.
Backlight and the Wood Cracking function are not available on this model.

START-UP AND OPERATION

Manual operation
Press this button to switch the device on/off or press and hold this button for
10 seconds to enable/disable the parental lock. Once the child safety lock is
activated, the heating function is switched off but the flame remains on.
Press this button repeatedly to select „L1", „L2", „L3", „L4" or "OFF" (4
brightness levels that can be selected).
Press this button repeatedly to set the following functions: Room temperature
between 17 °C and 27 °C (62 °F - 82 °F) > Heating continuously ON >
Heating OFF. After setting, the temperature you set flashes 5 times on the
screen and is then saved. Press and hold for 5 seconds to switch between
Fahrenheit and Celsius.
Press this button repeatedly to set the operating time of the appliance. You can
set the operating time to 1 > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > OFF > 1 (...). It is
not possible to operate the weekly timer manually. When the weekly timer is
activated, the normal timer is not available.
Heating
Timer function Flame On/Off
EN
43