Walimex Pro Power Shooter 600 Set Manuel D'instructions page 37

• The powerpack is being charged.
• The charge control on the charger informs you about the charge status.
• There is also a possibility to charge your powerpack without the Battery Pack.
6.2. Flash
Demount and mount protection cap/ reflector
WARNING
Posterior danger of bursting of flash tube
Make sure not to touch the flash tube with bare hands accidentally.
WARNING
Danger of burning on reflector, modeling lamp and flash tube. Please let
the device cool down for approx. 30 minutes.
1 Openings for reflector or protection cap
2 Unlocking Lever
• Switch off device.
See Switch the device on and off.
• Let the device cool down.
• Demount protection cap/ reflector.
See Demount and mount protection cap/ reflector.
• Push back unlocking lever and keep pressed.
• Plug the reflector into the openings, so that the opening for the reflex
umbrella (optional) faces downwards.
• Turn the reflector clockwise and listen for the reflector to snap into place.
• Release the unlocking lever.
• Stick the safety cap onto the unlocking lever.
1
2
37