WARNING
Fire danger through overheating
The device can overheat, if you operate it with mounted protection cap
or with covered ventilation slots. The device itself or easily inflammable ma-
terials in close distance could catch fire.
■ Don´t operate the device with mounted protection cap.
■ Don´t cover the ventilation slots of the device during operation.
■ Remove easily inflammable materials.
■ Please just use spare parts, which are conform to the required specifi-
cations. See Technical Specifications.
WARNING
Fire danger through hot parts
The flash tube may heat up to 240 °C, the reflector up to 75 °C. Easily
inflammable materials could catch fire, if they get in contact with hot parts.
■ Don´t cover the ventilation slots of the device during operation.
■ Remove easily inflammable materials.
WARNING
Danger of burning on hot parts
The flash tube may heat up to 240 °C, the reflector up to 75 °C.
■ Don´t touch the parts during operation and cooling down.
■ Please cool down your device approx. 30 minutes before starting any
mounting or maintenance arrangements.
30