Breville the Smart Kettle Luxe Manuel D'instructions page 11

NOTE
The default temperature setting of the kettle
when connected to the power outlet is 212°.
- When the kettle remains plugged into at the
power outlet it will automatically default to
the 212° temperature setting.
- When the kettle remains plugged
into the power outlet and different
temperature settings have been selected,
the kettle will default to the last selected
temperature setting.
NOTE
This kettle must be used only with the power
base supplied. Use caution when pouring water
from your kettle, as boiling / heated water
and steam will scald. Do not pour the water
too quickly.
NOTE
Always fill the kettle to between the minimum
and maximum marks on the water window on
the kettle. Filling above the maximum mark
on the water window of the kettle may result in
boiling/heated water splashing from the kettle.
SAFETY BOIL DRY PROTECTION
The kettle is fitted with a safety device, which
protects against overheating should the kettle
be operated with insufficient water. If this
occurs the kettle will stop heating. Unplug the
kettle from the power point and allow kettle
to cool before refilling and plugging the kettle
back into the power point. The safety device
will automatically reset when the kettle has
cooled down.
11