Latency Setting On Asio Applications - MIXVIBES U46MK2 Mode D'emploi

U46MK2 MIXVIBES

6.2. Latency setting on ASIO applications

Clicking the ASIO Control Panel button (or Config) of ASIO applications will open the ASIO
latency setting of the U46MK2. Run the Config/Latency menu to set the audio latency. Here
you can choose between different buffer sizes. Typically a lower latency is good when working
with software synthesizers or when you process audio signals from the audio inputs in real-
time with your audio software. A smaller latency value will however cause more system load.
For a typical faster Pentium 4 system, 128 ~ 256 are good values. Buffer sizes 1024 and 2048
are normally used only in special circumstances. The factory default of 512 samples provides a
basic level of compatibility with different systems.
19